View: 12 / 24 / ALL

  • HOT

    DIGIFLAVOR ETNA MTL RDA 18MM

    1,290.00

    Digiflavor ETNA RDA was designed in Italy by Giuseppe Pappalardo and Salvatore Agrosì in close collaboration with Digiflavor. Designed for a tight MTL draw especially suitable for tobacco and fruity flavored e-liquids, and nicotine salts e-liquids. It comes with an air inlet duct with hexagonal, unscrewable for the installation of the modules. Internal airflow can not adjust but can concentrate airflow to improves performance. Different airflow modules will satisfy your different vaping demands. 18mm single coil with two posts designed to position the coil exactly above the holes of the modules. The RDA comes with  top cap with locking system to ensure safety. It also supports bottom feeding by using BF squonk pin.

    In package: 1 x ETNA RDA, 2 x Hex wrench, 1 x 510 drip tip, 1 x BF squonk pin, 2 x Airflow modules, 6 x Coils, 2 x Feather Cotton, 1 x User manual, 1 x Spare parts bag

     

  • HOT

    GeekVape Loop V1.5 RDA 24mm

    From: 1,290.00

    Geekvape Loop V1.5 BF RDA has more exquisite appearance than Loop RDA. It also equips W-shaped build deck and innovative 3D surround airflow with a Sieve design. W-shaped build deck supports easy coil building for both single and dual coil. Sieve bottom airflow ensures an ultra smooth airflow which enhances the flavor significantly. The upgraded top cap is more coordinated. Arrayed airflow design provides precise control and ensures airflows are always in the correct position. The RDA also comes with BF squonk 510 pin for bottom feeding. Six colors optional.

    In package: 1 x Loop V1.5 RDA, 1 x 810 Drip Tip, 1 x Allen Key, 1 x User Manual, 1 x 510 Drip Tip Adaptor, 1 x Bottom feed Positive Pin, 1 x GV Triangle wrench, 1 x Hex wrench

     

  • VANDY VAPE PULSE X RDA

    1,490.00

    Vandy Vape Pulse X BF RDA Atomizer is an amazing RDA with innovative refilling system and build deck. As its name “Pulse X” suggests, the build deck has got its shape like the letter “X”, which allows both vertical building and horizontal building of dual coils, and this design idea makes it easier to install coils and tighten screws. In the center there exists an e-liquid tube, thus e-liquid from bottom can flow up and drop down, sufficiently saturating cotton. With 2ml wells, it stores much tasty juice and you can imagine large, dense and tasty clouds come out when you start heating. Vandy Vape Pulse X comes with a stainless steel cap and a PC frosted cap, on each side are six airflow holes in two rows for adjustment. With 810 resin drip tip, it offers large, flavorful clouds for you!

    In package: 1 x Pulse X RDA, 1 x Accessory Bag, 1 x User Manual, 1 x Coil Lead Guide, 1 x PC Cap

     

  • Wotofo Profile RDA 24mm

    From: 1,290.00

    Wotofo Profile RDA is designed by Wotofo and Mr.JustRight1. The Profile RDA applies mesh coil which features 0.18ohm and supports 40-60W wattage range. The coil is fast heating and bring excellent pure taste. It compatibles with both of mesh wires and tradtional wires. The spring-loaded ceramic ensures contact between mesh and cotton. Side adjustable airflow system for huge cloud production. The RDA also supports squonk pin for bottom refill.

    In package: 1 x Profile RDA, 1 x User Manual, 1 x 6mm Agleted Cotton Strip, 1 x Extra 810 Drip Tip, 1 x Bending Tool, 1 bag Clapton Coil, 1 bag Mesh Style Coil Sheets, 1 bag Extra Orings & Screws

  • FREE SHIPPING

    Vandy Vape Pulse X Squonk Kit

    3,090.00

    Vandy Vape Pulse X Squonk Kit is designed by Vandy Vape & Tony B, which is constructed by ABS material, the panel can be replaceable by your preference. This kit is powered by a single 18650, 20700 or 21700 battery and support 90W max output power. Large capacity silicon squonk bottle is convenient for bottom feeding. Pulse X RDA adopts dual coil post deck and bottom airflow system. Enjoy excellent vaping experience from Pulse X Squonk Kit.

    In package: Pulse X BF Kit, 1 x 8ml Squonk Bottle,  1 x 18650 Battery Adaptor, 1 x Trimming Device, 1x Coil Lead Guide, 1 x Accessories Package, 1 x QC USB Cable, 2 x Coils, 1 x Instruction Manual, 1 x Warranty Card

     

  • Hellvape Drop Dead RDA 24mm

    1,430.00

    Hellvape Drop Dead RDA Atomizer is co-designed by Heathen, The Vapor Chronicles(TVC) and Hellvape. With 24mm diameter, it has four large post holes for simple building of both single coil and dual coils. With larger space, you have more ways to install the coil. It’s up to you! Drop Dead is designed with innovative downward sloping airflow, and you can find 14 airflow holes in two rows to bring you extremely smooth and tasty vaping. You can accurately adjust the airflow to the tightest condition, or the widest one, thus it’s a great choice for DIY lovers. It comes with deep juice well, and standard positive pin and raised BF squonk 510 pin are included. Pre-installed with colorful resin drip tip, there is another balck 810 drip tip for replacement.

    In package: 1 x 24mm Drop Dead RDA With Colorful Resin DT, 1 x Clear Frosted 810 Tip, 1 x Stainless Steel 510 Adapter, 1 x Accessories and Tool Bag , 1 x Drop Dead Sticker 1 x Drop Dead Sticker

  • Digiflavor DROP RDA 24mm

    1,490.00

    Digiflavor introduces a new dripper for flavor chaser. The authentic Digiflavor DROP RDA is a 24mm diameter atomizer that provides smooth vaping experience. The dual post build deck comes with 4 larger post holes allowing for easy coil placement, and maximum build space with open access to trim excess. And the Locking top cap guarantees perfect airflow positioning which makes adjusting airflow much easier. Two kinds of 810 drip tips are included, as well as a 510 drip tip adapter. DROP RDA can be used as a standard dripper or a squonk-friendly one.
    This RDA comes with bottom feeder pin.

    In package: 1 x DROP RDA, 1 x 810 Drip Tip, 1 x 510 Drip Tip Adapter, 1 x Bottom Feeder Pin, 1 x Allen Key, 1 x Accessory Bag , 1 x User Manual

     

  • Digiflavor Drop Solo RDA w/ BF PIN 22mm

    1,490.00

    Digiflavor Drop Solo RDA Atomizer is the single coil 22mm edition(including 24mm beauty ring to match large mods) of the original 24mm DROP RDA, which is widely recommended as the best RDA on the market. Drop Solo has two posts with large holes, ensuring simple vertical coil installation and wire cutting, and the notch is designed on the posts to fix the coil easily. On single side of SS cap, ten airflow holes in four rows brings you stepped airflow to hit the coil directly(6 holes in 3 rows on transparent cap), and you can accurately adjust it to get ultra smooth and great flavor. Moreover, its deep leveled juice well makes both dripping and bottom feeding easier and prevents leaking.

    In package: 1 x Drop Solo RDA, 1 x Bottom feed positive pin, 1 x PMMA 24mm Accessories, 1 x Drip tip, 1 x User Manual, 1 x Allen Key, 1 x PMMA Mid Cap, 1 x PMMA Top Cap, 1 x 510 Drip tip Adapter, 1 x Spare parts Pack

     

  • Vapefly Galaxies MTL Squonk RDTA w/ BF Pin 22mm

    1,460.00

    Vapefly Galaxies MTL Squonk RDTA Atomizer is the atomizer that can offer you top-notch flavor. Vapefly Galaxies MTL Squonk RDTA has bottom air slot and two-sided airflow channels at the same time, which form 360° surrounding airflow to deliver large could and rich flavor. While the top chamber is ultra tight and small, compressing the large cloud into smaller size and bringing intense flavor and throat hit. On two sides, multi-sized airflow holes create the 6-levels airflow adjustment, thus you can control the airflow more accurately. Designed with unique limitless screw AFC system, it offers you more selections. As for filling e-liquid, the spring-loaded filling port(press-to-fill design) is compatible with common filling bottles, and it can close automatically after refilling. Also, bottom feeding is supported to avoid flitting-up of e-juice.

    In package: 1 x Galaxies MTL RDTA, 1 x Glass Replacement Tube(2ml), 1 x Bottom Feeding Adaptor, 4 x Allen Screws, 1 x Screw Driver, 5 x O-Rings, 2 x Ni80 26ga Pre-build Coils 1.0ohm, 1 x Organic Cotton, 1 x Manual

     

  • Vandy Vape Pulse BF 80W Box Mod

    From: 2,390.00

    Vandy Vape Pulse BF 80W Box Mod is designed by Vandyvape and Tony B. It features the fast, stable, and safe built-in 80W chip that supports multiple output modes. Besides, it can compatible with the single 18650 and 20700 battery that max wattage up to 80W. Mainly made of high-strength PE Material, the Vandy Vape Pulse BF 80W Mod is the high-quality squonk 80W chip Mod for your RDA.

    In package (Standard Version): 1 x Vandy Vape Pulse BF 80W Box Mod, 1 x 8ml Squonk Bottle, 1 x QC USB Cable, 1 x Instructional Manual, 1 x 18650 Battery Adaptor

    In package (Hi-End Version): 1 x Vandy Vape Pulse BF 80W Box Mod, 1 x 8ml Squonk Bottle, 1 x 30ml Squonk Refill Bottle 1 x QC USB Cable, 1 x Instructional Manual, 1 x 18650 Battery Adaptor, 1 x 30ml Silicone Refilling Bottle

    The color and pattern on resin part may be a random difference due to material. 

     

  • Wismec Luxotic 100W Squonk Box Mod + Tobhino BF RDA Kit 7.5ml

    2,590.00

    The authentic Wismec Luxotic BF Kit consists of Luxotic BF Box Mod and Tobhino BF RDA.
    The Wismec Luxotic BF Box Mod, designed by JayBo, features its reimagined squonk system and inbuilt refillable e-liquid bottle of 7.5ml capacity. Powered by single 18650 battery (not included), Luxotic can reach maximum output to 100W. The large capacity squonk bottle allows you to vape with ease without refilling frequently. The cover panel is replaceable, making it different whenever you like.
    The Wismec Tobhino BF RDA is a 22mm atty that features open build place and adjustable side airflow. You can even build a fancy coil in this tiny RDA. It comes with decorative ring for not only decoration, but also heat insulation. With optional top cap, Tobhino is compatible with both 510 and 810 drip tips.

    In package: 1 x Luxotic BF Box, 1 x Tobhino BF RDA, 1 x Cotton, 1 x Warning Card, 1 x E-liquid Bottle, 1 x 810 Top Cap, 2 x Clapton Coil, 2 x User Manual

     

  • GeekVape Flask V2 Liquid Dispenser 30ml

    890.00

    The GeekVape Flask Liquid Dispenser Light Version is a new lighter and portable e-juice bottle designed for Squonker MODs which can be used to fill squonker as a conventional dripping/filling bottle. This flask Liquid Dispenser consists of a high grade stainless steel tube and a removable soft silicone internal bottle for long term economical and durable usage due to its replaceable capability. Good tool for squonk lovers!